Behringer DCX2496 Project (LVDS)

Audio enthusiasts enjoys exotic expensive cables.  I agree that hear the difference is a great fun.  But that is too expensive for just a digital cable!  To reduce the cable issue and exotic expenditure, I have chosen cheap Ethernet cable.  Any CAT6 cable has 4 pair of 110ohm links, connectors and cable is carefully controlled to archive 250Mbps/pair at any length.  1000Base-T connector has well-designed isolation transformers, which also eliminates common mode noise like buzzing cellphone.  So, I just take advantage of this.  The CAT6 cable accepts LVDS as well as RS-485, or AES/EBU signal level and impedance.  I chose LVDS simply because it accepts higher signal rate and step away from those cable issue.  LVDS also makes circuit simpler because no DC-cut capacitor is required to drive the transformer.  And SN65LVDT348D LVDS receiver has terminators built in.

f:id:kazumasamurai:20210219132728j:plain

LVDS receiver

オーディオファイルの諸先輩は、より良いケーブルに投資されていると思います。確かに、ケーブルの違いを聞き分けるのはワクワクします。ただ、我が家は手元不如意で高価なデジタルケーブルは無理です。ケーブルに関わる諸問題を解消するために、安価なイーサネットケーブルを使っています。長さを気にすることなく、250Mbpsが通る4組の上等なケーブルです。1000Base-Tのコネクターにはアイソレーションのトランスが入っているので、携帯からの電波も影響がありません。そこで、デジタル伝送にはCAT6ケーブルを使っています。ただのケーブルなので、110Ωの差動でさえあれば、LVDSだろうがRS-485やAES/EBUも通ります。

LVDSを選んだのは、単純に伝送帯域が広いからです。LVDSであれば、アイソレーショントランスに直流が流れないようにするコンデンサも省略できます。SN65LVDT384Dであれば、ターミネータも組み込まれています。